One of a Kind Show Promo Code

We've be fortunate to be selected as one of the Artisans to be part of the 2017 One of a Kind Show (OOAKS) in Toronto. We will be putting together some posts in the weeks following the show to share some of the challenges and experiences we encountered in both applying and preparing for our very first OOAKS. In the meantime, if you are planning on attending the upcoming show, we have a sweet promo code to share with you.

If you purchase your tickets online, use the promo code ETJ3NMXG (all caps) to get tickets for only $12 versus the $15 at the door. For full information about OOAK show, purchasing tickets, and seeing the full artisan list click here.

Glow in the Coasters

With all the excitement of using glow in the dark inks, we recently produced some glow in the dark paper coasters too. These ones are inspired by some classic glasswares we had around the house that we used for storing homemade jams. Each set contains 6 hand drawn images containing classic Kerr, Ball, Dominion, Ideal, Bernadine and Crown glass jars. We hand silk screened each one using gold and custom mixed glow in the dark inks.

Glow in the dark cards

It's a been a few months since we've shared a post about some of our recent work. We added some sneak peaks and images to our twitter account when we made these new items, but sometimes is not the most adequate forum to showcase the designs and process. 

Posted below are some of our new cards and designs. Though we often look to designs for letterpress printing, we sometimes forget to acknowledge that screen printing doesn't stray far from ours hearts. And, if you are familiar with both screen printing and letterpress design, you can recognize some similarities in process despite using vastly difference equipment and producing very different aesthetics. 

For some of our recent cards, we decided to hand silk screen them in limited numbers. The reason for this was that we got a hold of some glow in the dark paints, something you just can't seem to find for letterpress, and, you know, we just had to try them. So, our design and colour wizard, Shauna, had the awesome idea of using the glow inks as the base and mixing in some other colours. That way you get the hit of colour while maintaining that kid inspired happiness of still glowing in the dark!! 

This entire card is glow in the dark!
Making sure your thanks are also visible in the dark

Simple two colour screen print. The electric eels glow
in the dark. How shocking!

Fritzler-Krueger Wedding

We recently completed our most extensive wedding package ever! This included save the dates, invites, maps, reply cards, reception cards, and even letterpressed envelopes. Wow!!

These invites were for the lovely and effervescent young couple Megan Fritzler and Dustin Krueger. These beautiful people came into our studio with a an inspired visions, an unrelenting enthusiasm for letterpress, and a yellow floral chair (more on this in a minute). Although they knew what they wanted in their invitation suite and the vibe they wanted to convey, they came to us to design all the elements to capture their vision, all inspired by a vintage floral chair. I wish we still had a photo of the chair - recent computer issues has resulted in that photo being lost forever - but it is similar to this one (but in bright shades of yellow and gold).

We hand sketched a pattern from this vintage chair and used it as the centrepiece for all the elements. Also, because Megan and Dustin were so awesome in giving us the liberty to try new things, we decided to make this a four colour - that's right four colour - design. If this wasn't complicated enough already though, we hand mixed all one of a kind colours. These invites may have been labour intensive, but we believe they came out beautiful!!  Have a look and tell us what you think. Big congrats go out to Megan and Dustin! You two are amazing and we truly appreciate letting us be part of your wedding extravaganza. Wishing you both a lifetime of love, laughter and happiness.

The Final Product

The design and polymer plates all ready to hit the press

Laying down the first two custom colours for the
 reception and map portions of the invitations

Laying down the first two custom colours for the invites, reply cards
and accommodations cards

Using our Pantone colour swatches to get just the right colours

Adding in the third custom colour layer

The fourth custom colour layer for the reception and map
portions of the invites

Here you can see the before and after the fourth colour was added

Fourth colour added to the reception cards

The completed invitation card

The completed reply cards and reception invitations

Light Box Display Sign

Over the last couple weeks we have been captured by the laser cutting bug. The precision and intricacy that modern laser cutters and engravers can achieved is incredible. Having had a couple wood pieces cut for us for some experimental work, we got to creating a new light up sign for our booth and outdoor display. Since we were treading in new waters by creating this sign, we figured we'd make another 'how to' post for anyone else considering creating their own light up display. Here is how we made ours.

Materials List
1- 24in x 24in Sureply board
1 - 1x2x96in (8ft long) lumber
20 - 1-3/4in screws
2 - 24in LED light strips (we used these)
2 - AA battery packs (we used these)
1 - electrical switch (like this)
1- 24 x 12in piece of aluminum foil - can use multiple smaller pieces but enough to cover the 24x12in surface area
wood glue
soldering iron with flux
coloured tissue paper

We first cut the sureply into two - 24x12in pieces - one panel will be the front, the second will be the back of the completed light box. We then created a design with the same dimensions (24x12) and had it laser cut into one of the wood panels. The nice thing about using sureply is it's really sturdy and has a wonderfully smooth finished side which can either be used for a wood finished look, or can be easily painted later on.

Now add your coloured tissue paper to the back of the laser cut front panel. Using the wood glue, brush out a light outline around the design and adhere the tissue paper to back. The tissue paper does not have to be cut precisely, but it shouldn't overlap anywhere visible on the front side.

Wood glue used to adhere the white tissue paper to the lettering portion on the back of the front panel

View from the front once the white tissue paper was glued on the backside of the front panel

Once you have all the tissue paper glued in, create the box which will house the lights. For this, we cut down the 1x2x96 to two 1x2x12in and two 1x2x10.5in segments. Using these pieces, create a box around the back of the front panel.

Cutting down the 8ft 1x2

The two 1x2x12in pieces cut

The box frame adhered to the back of the front panel.

Screw the sides of the box frame together. We used a Kreg jig to create pocket holes so the screws would not be visible from the exterior of the box (you can see them in the previous photo on the short 1x2x10.5in  side piece). Use the wood glue and clamps to adhere the box frame to the back of the front panel. If you plan to paint the front panel, you can use finishing nails on the front of the front panel to further reinforce the box frame to the front panel.

While the glue is setting, glue the aluminum foil to the other 24x12in sureply panel - your back panel. For best results make sure the shiny side of the aluminum foil is face outwards.

Aluminum foil, shiny side out, glued to the back panel

Now for a bit of the complicated stuff - wiring the lights. We used the ones from Walmart since we don't know a whole lot about wiring LED lights ourselves. The nice thing about these ones is that the package already comes prewired with a switch and battery pack. However the switch does not stay one automatically and the battery pack consists of a small 9volt pack. This is insufficient for longer duration of constant use.We followed the same wiring pattern from the package, but replaced the battery wiring going to the 9volt pack with the two AA battery packs and soldered together in serial. We also replaced the package light switch with a manual flip switch. Again, we followed the wiring pattern and soldered in our new switch in place.  The LED light strip also has an adhesive back, which makes mounting the lights super simple. With the wiring complete, add the lights to the bottom and top of your light box, with the lights facing the back panel.

LED strip lights mounted

we hot glued the excess wires to the back of the front panel

The soldered wires, battery packs and switch for the lights 

Our switch box with the battery packs mounted

We built a small switch box to mount the batteries to. This isn't necessary. You could mount the battery packs to the inside of the box, but we wanted easy access to change batteries as needed. Once you have all the lights mounted, and wires soldered, check to see if they all work. Now, place the back panel on, enclosing the light box using the 1-3/4in screws. Pre drill the holes, as the screws may cause your box frame to split.

Finished product

Finished product with lights on.

You can probably see our new sign in action at the next craft market. If you have any questions about how we made our custom light up sign feel free to contact us or leave a comment below. We'd also love to see pics of your own or read comment on how you would improve this build.
This was a very fun project that was a little outside of our normal operations. Hope this post is helpful to brightening up your displays as well.

Heritage Recipe Boxes

Over the last year we have been developing some new wood and wood related goods. One of our favorites is the heritage recipe boxes. Some love them for the screen printed design, others for the handcrafted workmanship, but one thing is for sure, everyone seems to enjoy the rich history behind each and every single box.

Saskatchewan is synonymous with the images of fields of wheat and the iconic wooden grain elevators. At its peak, Saskatchewan was speculated to be the home of more than 1000 wood built grain elevators, distributed throughout the corners of this vast prairie province. In 2000, however, this number had declined, with only 800 wood grain elevators in active use. More recently though, due to rail line closures and the diminished economic feasibility of many of these elevators in small Saskatchewan rural communities,  the number of active wood grain elevators was estimated at 420. Many small communities had become ghost towns and their once majestic wooden grain elevators reduced to teetering structures, aging all alone amongst the immense open fields, which once bustled with the sounds of trains and farming equipment. These aging structures may no longer be filled with the grains of hard working farmers, but there wood has been preserved and recycled to continue a legacy in a variety of new forms.

Included in this, are our heritage recipe boxes. Each one is hand built using the fir from decommissioned and demolished Saskatchewan grain elevators. All the wood is planned and sanded before use, but nail holes and knots are preserved as part of the underlying history of the wood.  The finger joints for the bases and lids are cut and assembled by hand. Once sanded smooth, the lids are hand screen printed with original hand lettered design. To finish it off, each box receives two coats of stain to bring out the rich textures of the fir and two clear coats to enhance its durability.

There is lots of love that goes into the making of these recipe boxes, but even more history behind the wood chosen to build them.